HEAT FLUID



KONUSTHERM 305


The heat fluids are used in procedures for the transfer of indirect heat; they are the means of connection between the energy source (heater, boiler, etc.). and consumer of heat.

The HEAT FLUID FOR TRANSFER OF HEAT KONUSTHERM 305 , is a synthetic fluid used in thermal heat transfer in plants operating in the phase net

The fluid heat KONUSTHERM 305 has thermal characteristics stable until the temperature of 305 ° C, high heat transfer coefficients and an EXCELLENT DURABILITY in systems where the conditions of operation are appropriate to the design of the facility.



BENEFITS OF INDIRECT HEAT ON DIRECT

  • to prevent hot spots (hot spots) in the product to be heated


  • Accuracy in controlling the temperature of the product to be heated. The temperature can be controlled as the need for each product / consumer


  • The distance between the heater and the consumer may be greater, thus taking the safety standards relating to fire and explosion


  • The heaters may be placed in a central heating and heat distributed by all processes


  • Less cost of fuel with a central heating regarding several burners


  • reduction in the costs of maintenance


  • Using the same fluid termico for heating and cooling systems


  • The storage of heat is possible. This is extremely ventajoso when there is a wide range of consumption with peak consumption for short periods


  • In direct systems, the exchange of fuel previously chosen leaves very expensive, sometimes impracticable.


  • Thermal insulation can be optimized, evitamdo bridges of heat


PARTIAL VIEW OF A HEATER OF HEAT FLUIDO KONUS ICESA

FEATURES

  • thermal stability


  • Resistance to oxidation


  • not contain sulphur


  • Heat specific high


  • High thermal conductivity


  • Lower viscosity of the low temperature


  • for Thermal Fluid Transfer of Heat


  • Range - 15 of the 305 ° C - phase Net





PROPERTIES


  • high temperature of operation - 305 ° C


  • high temperature of film - 336 ° C


  • Point of Solidificação - -60 º C


  • Flash Point - 148 ° C


  • Fire Point - 155 ° C


  • self-ignition temperature - 406 ° C


  • Density 30 ° C - 968kg / m


  • coefficient of thermal expansion - 0.000945 / o C


  • heat of vaporization - 54 kcal / kg


  • Composition - Aromatic Hydrocarbons


  • Appearance - Net yellow


  • content humidity - 130 PPM


VARIATION OF PROPERTIES WITH THE TEMPERATURE